Видео

This is proof that you need a Sherline or Proxxon mini mill & lathe! Then you could make your own in whatever style you desire! Hope you’re doing well, as I haven’t seen any new posts from you in a long time!

Do you like that bosch green router? I want to buy one like it

That blade guard demonstrates just why most of them get chucked in a corner.

What thickness would you recomend for a crosscut for the FET saw? Is it MDF?

Nice review. What was that blue plastic thing? Very nice with the Cross cut sleigh. Could you show more of that in a video?

Can you lower or rise the blade on this model?

Can we find "Polymorph Thermoplastic" in any bin containing plastic under any form, like bottle, pack, etc . . .?

Thanks for just another helpful video from your side! Your FET videos helped me a lot. One question about the DH40 Thickness planer: Is it possible to insert timber which is grooved (90° cross feed direction) on the upside? I guess the licker-in and the feed roll are on the upside and the grooved side which I want to reduce thickness is also on the upside. Even if I would have to push it in manually would be okay to me. I just fear that the edges of the grooves might get disfigured...

Ainda vou ter uma dessas .

Just got one of these. It's a fabulous little saw. Very well made and extremely accurate right out of the box.

What a helpfull videos, you made! Thank you so much for all of them!

Hello Harri, how are you? I thought the idea and project were excellent, I would like to know if you could provide me with the project measurements. I live in Brazil. Thank you for this. Big Hug Ricardo Santos

Got bored with us after the first minute. I hope it ends well.

‘One of the first things we should make’ … then we’re left to guess what the ‘thing’ is ??

Hello! Do You think that KS 230 could handle guitar neck fret slot cutting? Could you set the height of the blade to 3mm? Could it cut thicker wood (rosewood, ebony, etc.)? Thank you!

cat got your tongue?

What's the deal with Proxxon videos and no narration? Is it a Proxxon thing?

Is this for sell?

Was kostet so ein Schlitten

Estou aqui numa cidade do interior do Brasil.Muito esclarecedor seu vídeo. Obrigado e um abraço.

The motor cooling air is exhausted directly into the blade housing. With nlwhere else to go, the exhaust air then travels straight down onto the workpiece, and blows sawdust all over the inside of the garage. The dust collection funnels and vaccum attachment port are merely a formality.

Yea we’re liking this…there’s an analytical mind at work here, glad to see individuals crafting beautifully made art. For m my sins I make miniature rocket lamps and you’ve shown me a couple of methods that may well find their way into future rockets.

You abandoned the riving knife, right? It's a pity. The riving knife is like 1,1 milimeter and the 36 teeth blade is like 1,6 milimeter :( This way it cannot work. But seems with the feather board is quite safe

Was using such a machine in the garage this afternoon, and was inspired to check its alignment. The azimuth is easy to set up; just loosen the screws, slew the saw to 90°, and tighten the screws again. As for the "leaning" function, that requires a pair of 10mm wrenches, a mattress to kneel on (to keep the work at eye level), and no small supply of patience. Tedious, but manageable My one real "gripe" with this saw must be that hot air from the motor is exhausted into the blade housing, such that dust is blown absolutely everywhere, making it a very "dirty" tool, and generally unsuitable for indoor use for this reason.

👌🤏🫴🤚🤌🖖🙌🫶

Ahşap parçayı neden kontroplak üzerine yerleştirdiniz

Hey, do regular nail files work?

I've got the cheapo Micro Mark MicroLux mini table saw with a fixed blade. I'd have to make a jig to cut grooves since I can't lower or raise the saw blade. I do like the sled you made. Works very well with precision cuts. I use my saw mostly for making HO scale lumber for my railroad. Cheers from eastern TN

Have template for pdf?

Can you please to a video on how to change the saw?

Hi, Just bought the Proxxon Fet table saw and have been watching youtube for ideas on how to build a cross cut sled, yours looks to be one of the better sleds, just wondering if you have any plans for making it and also what size are the aluminium tracks and where did you buy them from, thanks in advance and keep up the good work, THANKS

We waiting new upcomings and usefull inovation from your laboratory

I think that was the most informative video I’ve ever watched, without the dude uttering a single word!!! 🤣 Just what I needed to help design a work bench around my Bosch Mitre Saw! Thank you good sir!

A great improvement to what is a flawed and seriously overpriced item - one would have thought that Proxxon would have addressed the shortcomings of the saw given all the negative reviews and feedback that are out there - or because they are purchased despite the inherent shortcomings, Proxxon turns a blind eye and just takes the money. I just purchased their hot wire cutter - which has , not surprisingly , a completely inadequate , poorly toleranced fence. The fence is intrinsic to the precision of an otherwise great product, but despite negative feedback over several years, has not been resolved. Proxxon should be ashamed - it is not the " German Engineering " they advertise.

I'm having trouble changing the blade. It say insert an alen key into a hole but not sure which hole. Any ideas?

Hi, Great idea, have you done a video on how to make the item, if not would you consider doing one please, Many thanks

Are you feeling better yet? I hope your eyesight has improved. Miss your videos🥰

I have one of these B&D power files and it keeps throwing belts off. It doesn’t matter how I adjust the belt adjuster? Is it just worn out? Do I have to buy another one?

Where did you get the mitre fence from?

Very nice work. I think it is mostly useful for grinding dust, drilling is not really a problem unless I drill a lot, and in that case I run the vac a few times during the work to clean the area. The chuck is a big problem for this machine. It's a crappy chuck made for impact hand drills, not for bench drill machines. I changed mine, and that upgrade is really necessary for this machine. During all the years after the change I never had any issues with the chuck, the drill bits never ever fell out in the middle of a drilling work and the runout is also much less now. Here is a video about how to change the chuck to a better one: ruclips.net/video/nCqVoaGVK8g/видео.htmlsi=keE4udXOp34wgY5U

it’s called a riving knife really not a splitter

What an annoying music, do not put any music, it’s just stupid

Perfect universal language and technical experiment. You are "The Lord of Proxxon FET 27070". I wish my dear wife could be like you when explaining things. I appreciate the serenity and simplicity of your ability to express. and you made me buy a Fet. Loves and respects from Turkey...

Thanks for the awesome idea! I'll try making it by watching the video

can someone tell me if this product has a saw blade with a full kerf 1/8 flat top. Is it that so difficult. I swear make this saw blade size and you will get millions of consumers that are into kumiko projects ]

Thanks for the video, I tested mime using two joining screws and then checked all remaining holes with the double rule guide bushing and all holes checked out. Sorry to hear that others are having this problem.

Hello Harris, I did the same modification. Interestingly, for me the splitter only works on the right side. On the left side the wood lifts and leads to kickback. On the right side (almost) not. So I think I will just braze some thin sheet of brass or steel on the left side. I think .3 or max .5 mm should be sufficient. Luckily - so far no kickback happened. All the best, Bastian

Harris....did you make the riving knife for your saw or is that an original accessory with the saw? Thanks!

Such a small powerful saw. I see you took of the built in extension table. I assume you didn't like it?